The embrittlement of plastic woven bags in the process of melting is an inevitable difficulty, so how much do you grasp the relevant professional skills related to the defrosting of waste woven bags? The container bag manufacturer will show you around.
At the very beginning, it is well known that the situation of frost spray in plastic woven bags is the situation of decreasing the tensile strength, setting up layers and fading of waste woven bags. Although the value of waste woven bags is high, the heavy materials are thousands or even tens of thousands of times the value of goods. Therefore, the operating rules of waste woven bags are a very important difficulty. That's why I talked about the aging control of containerized bags. The aging of container bags is mainly caused by ultraviolet radiation in sunlight, which leads to the degradation of polypropylene.
We hope that we can control the frost spraying of waste woven bags. Because of the safety factor of transportation materials, we must make sure that the general anti-aging life of waste woven bags exceeds half a year or even one year. Some customers will show manual service to speed up the detection time of embrittlement and ultimately retain strength, and even some customers mark the amount of UV additives, according to customer requirements, formulate technical solutions for products. Design the production formula. Due to the embrittlement of regenerated particles, the breakdown of molecular structure chains, the reduction of physical properties and the reduction of service life, it is necessary to select new upgraded materials for raw materials.